Xtralis OSE-SPW OSID Series Emitter Wired 24VDC

The OSE-SPW is used as a preferred solution when 24 Vdc is close by.

The company that revolutionized very early warning smoke detection with VESDA has reinvented smoke detection for open spaces with Open-area Smoke Imaging Detection (OSID). OSID by Xtralis provides reliable, cost-effective smoke detection for open spaces where fire detection presents unique challenges and where very early warning is not always the priority.

In its simplest configuration, OSID by Xtralis uses one imager, a camera-like device with a wide field of view, and a wired or battery-powered emitter roughly aligned on the opposite wall within the protected area. The emitter sends both infrared and ultraviolet coded light signals to the imager. If the light reception is altered due to the presence of genuine smoke particles, the imager will go into alarm. The novel use of dual light frequencies in an open-path device enables OSID to discriminate between real smoke and other objects, including insects, steam, condensation and dust, thus drastically reducing false alarms.

OSID’s uncompromising performance is based on the patented use of digital imaging, dual-frequency beams and smart algorithms delivering:

Patented dual wavelength, UV & IR, particle detection

CMOS Imager with wide viewing angles

Simple installation, commissioning and maintenance

High tolerance to vibration and structural movement

High tolerance to dust, fogging, steam, reflections and object intrusion

High resistance to reflected sunlight

On-board log memory

Software tool for diagnostic purposes

Aesthetically discreet and 3D coverage

Long range up to 150 m. (492 ft.) with minimal free space (Ø15 cm./5.85”)