Kentec E01040L2 Sigma CP-R Low Profile Enclosure – Conventional Repeater Panel – 4 Zone – No PSU2

Kentec E01040L2 Sigma CP-R Low Profile Enclosure – Conventional Repeater Panel – 4 Zone – No PSU2  

The Sigma CP-R Repeater is compatible with all Sigma CP control panels which have operating software version V2.0 or above. Repeaters are available with 2, 4 or 8 zones and in mains powered (K versions) or 24V powered (E versions). Mains powered repeaters require only a two core data cable from the main control panel. 24V DC versions require an additional two cores for power either from the main panel or from another 24V DC source.   A mixture of Repeaters, Ancillary boards, or Sounder Boards up to a maximum of 7 of each type can be connected to a control panel and each is allocated an address from 1 to 7 using a binary coded DIL switch. The total length of the data cable from the main panel to the last repeater must not exceed 1200 metres.  

Key Features:

Two wire serial connection

Up to 7 panels per system

230V AC or 24V DC powered versions

Full control over main panel

Volt free fire and fault contact outputs