Gent Heat Sensor with Voice Sounder & High O/P Red VAD

S-Quad’s Multi-sensor with integrated sounder and VAD combines renowned advanced sensing technology with state of the art visual alarms. The only practical solution meeting the demands of detection and the performance needed to meet the EN54 part 23 standard.

VAD colour and performance variants
High intensity option with three intensity settings to achieve maximum flexibility for different room coverage, optimising loop coverage

Standard intensity option also available

White VADs use a multi-die LED with a ‘Day White’ colour

Red VADs use multiple red LEDs giving a true red colour

Voice messages

The speech function is provided by stored messages on a non-volatile flash memory component. This audible output from the flash memory can hold up to 20 seconds of speech. There is also the capability to provide complex tones, such as bell and DIN tones. Each sensor includes four standard messages with the component, which are as follows:
Alert Message: (Female Voice) “An incident has been reported in the building, please await further instructions”

Alarm Message 1: (Female Voice) “Attention please, this is an emergency please leave the building by the nearest available exit”

Alarm Message 2: (Male Voice) “This is a Fire Alarm! Please leave the building immediately by the nearest available exit”

Test Message: (Female Voice) “This is a test message, no action is required”

Features 

Sensor and alarm in one device reduces installation time and cost. Built-in high intensity VAD helps alert occupants in noisy environments as well as the hard of
hearing

Meets all the requirements of the Equality Act 2010

Compatible with the S-Cubed wall mounted VAD

State of the art, high efficiency visual alarm technology

Advanced power management that increases loop capacity and integrity

Range of devices and power settings to suit widest range of building applications

Light output that allows devices to be sited at standard smoke and heat detector spacings

Synchronised flash rate across the whole control panel avoiding risk of induced seizures

VAD can operate independently of the sounder if required

Meets the requirements of BS5839 part 1 relating to sensitivity to epilepsy